Extra Thin PCB

Extra thin printed circuits are boards thinner than the standard PCBs. The
typical thickness of a standard PCB ranges from 1.0 mm to 2.0 mm, with a minimum
thickness of 0.3 mm or 0.4 mm for 1-layer or 2-layer PCBs. For 4-layer PCBs, the
thickness is usually around 0.6 mm. These boards are commonly referred to as
thin PCBs or thin boards.

Sometimes, due to space constraints, design requirements, or specific needs, a
much thinner thickness is required, such as 0.25 mm, 0.20 mm, or even 0.15 mm.
This allows the PCB to be used in applications like SIM cards, sensor cards, and
more. Due to their extreme thinness, these are known as extra thin PCBs or very
thin PCBs.

With the demand for thinner devices, there is a trend towards making
designs more portable, lightweight, and flexible. Consequently, the application
of extra thin PCBs is becoming increasingly widespread.

Extra thin FR4 PCBs can be manufactured as thin as flexible PCBs, offering
bendability similar to a flexible circuit, but with more rigidity and at a lower
cost compared to boards with the same copper traces.

For extra thin PCBs, we can produce them in the following thicknesses: 0.15 mm,
0.20 mm, 0.25 mm, 0.30 mm, with or without solder mask, and copper thickness
options of ½ OZ, 1 OZ, 2 OZ, 3 OZ.